Steel Power Industry Equipment Power Generation Eequipment India

RIPPER - LOADERS

MPP RIPPER-LOADER

The customers' requirements and the field experience accumulated during operation of the similar machines were taken into the account when designing the above machines.

TECHNICAL DATA

Parameters
Capacity, no less than, m3/min
on rocks with spr 40 MPa	0.68
on rocks with spr 70 MPa	0.23
Cutter motor power, kW	55
Total motor power, kW	110
Rated supply:
voltage, V	660
current frequency, Hz	50
Boom sweep, m:
across the width	3.65
through the height	2.5
Overall size in a travelling position, mm:
width	1350
height	1200
length	7340
Weight, ton	21.3
Cutter assembly
Type: Boom-type cutter fitted with two axially-rotated bit crowns
No. of bits per each crown, pcs.	28
Rotational speed, rpm	91
Diameter across bits, mm	660
Crown deepening, mm	120
Cutter swivel angle about longitudinal axis, deg, no more than	180
Undercarriage
Type: self-propelled crawler-mounted under-carriage fitted with individually hydraulic-driven left-hand and right-hand trucks
Track chain width, mm	340
Travelling speed, m/min, no more than:
travelling	12.5
operating	11.2
Conveyor
Type: ring-type flight conveyor fitted with hydraulic drive
Trough width, mm, no less than	400
Flight chain motion speed, m/s, no less than	0.5
Operating pressure, MPa
Operating pressure, MPa	14
Capacity, L	500
Operating fluid	I-40A GOST 20799-80
Spray water system
Capacity, L/min, no less than	40
Water pressure at nozzles, MPa, no more than	1.5

MPPK RIPPER-LOADER

A bucket-type ripper-loader is a version of the Type MPP Ripper and is developed based on the common power and travelling module. This machine enables to raise labour efficiency 3.0 to 3.5-fold, eliminate manual loading of the rock and ripping of the bed. It is noteworthy that the machine is small in size, rather manoeuvrable, easy in operation and reliable in servicing. Due to the specially-designed collapsable boom applied, the digging area may be extended and bucket filling increased. The machine may be also used for carrying out another operations. Slinging elements are provided in the machine to lift and transfer separate loads and to perform rigging operations.

TECHNICAL DATA

Parameters	Values
Capacity, no less than, m3/min
on rocks with 6szh40 MPa	0.17
Total motor power, kW	55
Rated supply:
voltage, V	660
current frequency, Hz	50
Boom sweep, m, no less than
across the width	4.8
through the height	2.6
Overall size in a travelling position, mm, no more than
width	1350
height	1100
Weight, ton, no more than	12.0
Travelling speed, m/min, no more than	15
Bucket capacity, no less than, m3	0.35
Rated hydraulic pressure, MPa	14